UDCJ 3620/Automatic Production Line of Lumpial Making Machine

UDCJ 3620/Automatic Production Line of Lumpial Making Machine
  • Продавецwww.rapturewatch.us
  • Список ценUS $13500.00piece
  • Продажная ценаUS $13500.00piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,7 (503)

Oписание продукта

UDCJ-3620/Automatic Production Line of Lumpial Making Machine

Product Parameters

Model

UDCJ-3620

Voltage

380v/220v(50/60hz)

Heating Power

6kw or gas

Heating tube diameter

400mm

Main engine power

0.75kw

Conveyor power

0.55kw

Cooling fan

2-6pieces 15W/piece

Dusting powder

1 piece

Capacity

500-1000pcs/h

Dimension

4350mm*800mm*1200mm

RPM

1-2.5/min

Wrapper width

200mm

Wrapper thickness

0.3-2.0mm

Weight

330kg

Beater

Mixer Power: 1.1kw

Mixer Speed: 131rev/min

Mixer Capacity: 25kg/time/15min

Product Information

This machine can produce spring rolls, roast duck cakes, egg skins, tortillas and other kinds of noodles as raw material products.

timg

109029987198220329

Production line of spring roll making machine contains:Beater, main machine, conveyor belt, dusting, cooling, automatic folding, counting.

 

Production line of spring roll making machine(Beater, main machine, conveyor belt, dusting, cooling, automatic folding, counting).

spring roll making machine

Main machine

421613725872489166

Round and square to choose.

78457355820546766

657457023233658823

Usage

1. The machine wipes a small amount of cooking oil on the surface of the heating cylinder before use.


2. Beating: first add water to the pulping barrel (water temperature about 30 °C), then add cooking oil, and finally put the flour, the proportion: 100 kg flour plus water 135-155 kg, edible oil 6-8 two, salt 5-8 Two, optional raw materials are spring rolls, pastry powder (low gluten), ordinary powder (high gluten) when beating, can add 10% corn starch, make the skin shiny, when the pulping starts, start stirring for 5 minutes, stop for 10 minutes , play for another 5 minutes, stop for 10 minutes, repeat three times to use.


3. Leather-making and cake-making: electric heating type cake making machine. Firstly, when the heating cylinder is preheated at 70-80 °C, a small amount of edible oil is applied to the surface of the heating cylinder, and then the filtered pulp is added to the pulp bucket or pulp bucket. Prepare for production, and adjust the eccentric adjuster of the nozzle with the knob to the nozzle of the nozzle and the parallel of the heating cylinder. After moderately, the slurry will be produced. When the initial production, the machine speed and temperature will be lowered a little. When the production is running normally, gradually Increase the speed and temperature of the machine, and produce a spring roll or cake stack of 10 cm thick on a table or plate and cover it with a wet towel. It can be eaten in 6-10 hours.