2PCS 18w Led Work Light Flush Mount Driving Light Offroad Super Lighting Flood Spot Beam For Jeep SUV ATV UTV UAZ Car styling

2PCS 18w Led Work Light Flush Mount Driving Light Offroad Super Lighting Flood Spot Beam For Jeep SUV ATV UTV UAZ Car styling
  • Продавецwww.rapturewatch.us
  • Список ценUS $32.25piece
  • Продажная ценаUS $32.25piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,4 (483)

Oписание продукта








DIV09 CREE XM-L2 Underwater Split Style LED Scuba Diving Flashlight Diver Torch Lamp Light with 3*26650 Battery&Charger


This canister dive light utilize USA CREE XM-L2(U4) LED, max 1000 lumens output. Magnetic switch design is not only operate easily, but also satisfy your multi modes output requirement. DIV09 is powered by 3 X 26650 lithium batteries that runtime can arrive 12 hours. Rate to the 200m depth underwater and three O-rings good sealing construction, plus 10°excellent focus beam angle, it is one of the powerful primary lights for you to enjoy the amazing underwater world. 
LED: Cree XML2 U4
Lumen: 1000lm
Mode: Turbo - 1000lm - 3.3Hrs;
            High - 600lm - 5Hrs;
            Medium - 400lm - 6.1Hrs;
            Low - 200lm - 12Hrs
Battery: 3*26650 
Working Voltage: 3-13V
Dimension: head: 50mm (D) * 67mm(length)
 battery case: 35mm (D) * 258.5mm(length)
Net weight: 740g
Waterproof: 200M Underwater
Packing List:
1 x DIV09 Diving flashlight
3 x 26650 Battery
1 x Charger
1 x Lubricating grease
2 x Hexagon wrench
2 x O-rings
1 x Screws and nuts(one pouch packing)
1 x Hand rope
1 x User manual
- To ensure the magnetic switch work normally, please keep the light away from any magnetic goods,iron things and etc.
- To avoid the possibility of the dive light leak underwater, all of the connections are sealed. Please tighten the light before diving.
- Please take the batteries out of the light if you don\'t use it for long time, or the light may be damaged by the battery leakage or detonation.
- Please don\'t shine people naked eyes or look at the light directly with this device, in case damage the eyesight, especially for children.
Flashlight Maintenance:
- Please immerse the dive flashlight in the fresh water for few minutes after diving and clean the water after immersing.
- Please put lubricant on the switch threads after diving.
- Please don\'t drop or place your dive flashlight in sand, in case the sand go into the switch and threads.
- Please inspect the O - rings often, change a one once there is any damage. - Please clean the conductive connections often to ensure the flashlight work normally.
FAQ and Detection:
When the flashlight flash unusually or can\'t turn on, it might be the reasons below:
- The battery voltage is too low, please replace batteries.
- The threads or conductive connections parts are dirty, please clean them with alcohol.